Important Tips When Buying 8 Foot LED Shop Lights

Important Tips When Buying Best 8 Foot LED Shop Lights

When you decide to buy shop lights, you have to think about lighting output. And lighting output depends on several things as lumens, Foot candles, Illuminance, and Color temperature. These are needed to be discussed for enhancing knowledge. That may help you to buy Shop lights.

Luminous Efficacy

Luminous efficacy is one of the important factors for high brightness. Luminous efficacy means the ability to emit light using a specific energy draw. It is calculated in lumens per watt. The higher the value is, the better the bulb is at energy efficiency. 

Using Luminous efficacy for determining a light source’s efficiency. It helps dictate how many light fixtures are required in a particular space. HID shop lights have lower levels of luminous efficacy than LED shop lights. It means they are less energy-efficient light sources.

Color Temperature

Color temperature describes the color appearance of light. Maximum white light color produced by light sources has a shade of other colors. As an instance, warm white light colors have a yellow/red and orange glow. While cool white lights have a blue tint to them. The most popular of all light colors are between cool light and warm light lies daylight white. Accurate color temperature is measured by Kelvin.

Higher color temperatures allow for better color acuity. 5000K allows for a very neutral and clean white light that allows for improved color perception that 4000K and below would not, due to its yellow bias. If you want to replicate natural daylight conditions, 5000K would be the optimal color temperature.

Foot Candles

Foot candles are the most common unit of measure used by lighting professionals to calculate light levels in businesses and outdoor spaces. In brief, a foot candle is a measurement of light intensity and is defined as the illuminance on a one-square foot surface from a uniform source of light. 


Illuminance depends on location, orientation and the size and shape of its light sources. While illuminating, make sure the quantity of visible light that illuminates different specific areas. It focuses from all directions. Best quality 8 foot LED shop lights can cover the areas when illuminated.

Mounting Method

Mounting method is one of the important things to keep in mind while deciding to purchase. Whether LED shop lights come with the option of mounting. If you’re planning on purchasing a fixture and suspending it from your ceiling.

Positively, make sure you have access to the right accessories like mounting studs, hooks, cables, etc. Likewise, if you want to retrofit, make sure you’re getting the right size and length for your existing fixture.

Water Resistance

Where are you deciding to use the 8 Foot LED shop lights? If you plan on using your lights outdoors or in a moist, dusty, or hazardous setting. Then make sure that you’re getting water resistant vapor lights. Check the IP rating and make sure that it’s rated to at least IP65 for outdoor use.


Color rendering index (CRI) is a measure of how accurately a light source displays colors. Not all lights will provide accurate colors. While a low CRI is okay for non-color sensitive projects.

You may need a CRI of at least 90 for projects like painting, assembling products, woodworking, or metalwork. Fortunately, most LED lights have a CRI of at least 90, but can go all the way up to 98, nearly replicating daylight.

Frequently Ask Question

How far apart should led shop lights be?

It is found that every shop will have rows of lights. So determine how many lights you will need for a shop before you ever pick out a light. When you start a lighting layout, do not focus on what light you need, just focus on how many you need.

Then you have to measure your ceiling height. One single measurement will give a guide to lighting the entire shop, no matter how big or small. It is good to use for ceiling heights from 8' - 28' (feet) high. In order to attain good lighting, you always need the height of the shop to at least be equal to the spread of your rows. 

If you have a 10' ceiling, your rows must not exceed 10' (foot). If you like a bright shop, never exceed the ceiling height in row spacing. This will be good lighting.

How bright should shop lights be?

It is suggested that 30-40 lumens per square foot would be the minimum in a garage. This is about the lumens you would provide to create a well-lit kitchen. If you spend a lot of time in the garage, working on the car or a hobby, you might want to go a bit higher to 50-60 lumens.

How to replace 8 foot fluorescent bulb with LED?

As we have discussed before, most of the LED tube lights use a simple ballast bypass system. This simply involves ‘bypassing’ the existing fluorescent starter completely and wiring directly into the new LED fixture. So it is not difficult to replace an 8-foot fluorescent bulb with LED.

AntLux 8ft LED Ultra Slim Shop Lights

These 8-foot LED strip lights of AntLux produce 12600 lumens at 110 watts and are extremely effective. Instant energy savings by up to 70% on your power bill. It will run for 50,000 hours without needing to be serviced.

View on website: AntLux 8 Foot LED Shop lights
These ETL-certified LED wraparound lights are 8 feet long. Rugged aluminum is used, and it evaporates heat well. To ensure a long lifetime and consistent results, protect LED chips and drivers.

Eye care design with a soft, non-glare surface. The ultra-slim style adds elegance to your room. There is 180° of light shining from both directions, and there is no insufficient illumination. Every fixture contains two 8-foot LED strips. There is no requirement for additional lighting. It can be installed individually or in a continuous loop by its linkable architecture.

These 8ft led light fixtures are ideal for warehouses, workshops, supermarkets, garages, offices, basements, workbenches, laundry rooms, storage rooms, barns, machinery rooms, and car shops, as well as replacing fluorescent light fixtures.

AntLux 8 Foot LED Garage Lights

ANTLUX’s linkable 8ft led linear light is perfect for any application where high quality LED lighting is required for your workplace. Our 8 foot LED strip Lights provide you more brighter, cheaper and healthier lighting than incandescent and fluorescent lights. A step up from 8 foot led light fixture is not only in light but in look. It is the perfect energy-saving replacement for both remodel and new construction applications in residential and commercial needs.

View on Amazon: AntLux 8 Foot LED Garage Lights

Features of 8ft led lights

Easy and quick installation. Linkable design can make it easy to install individually or continuously.
Can be surface mounted and suspended mount to walls and ceilings for application variability.
Use residential or commercial voltage. Input voltage 120 Volts AC.
Outstanding thermal solution suit for usage in commercial application and provide wide angle brightness control.
Energy-efficient LED technology lowers energy usage and cost. Emits over 12000 Lumens for 8ft led light fixtures.
Instant-On. 50,000hrs lifespan. Environment protection without UV or IR radiation.

Widely Application

Garages, Warehouse, Workshop, Supermarket, Basements, Workbench, Storage Room, Equipment Room, Industrial Workstations, Workplace, Auto shop, Barn, Utility and Recreation Rooms, Office, Laundry Room, Hallways, School, Hospital, Apartment.

<< LED Grow Lights Vs Fluorescent Grow Lights

>> Where to buy 8ft led lights?