USD

How to alleviate commercial lighting maintenance headaches
2020-05-19

As simple as it might seem on the surface, it's just not easy to maintain commercial lighting.

 

Millions of Americans experience the unpredictability of lighting maintenance every year around the holidays, when a single bulb on their strand of Christmas lights burns out oftentimes knocking a section of the strand out. The timing of this is never convenient and usually takes more time to fix than you think it should.

 

Unfortunately, such headaches aren't exclusive to Christmas decorators. They happen in the professional lighting world all the time.

 

To make things even more challenging, lighting is getting more complex, and it is becoming increasingly difficult to maintain the consistency of commercial spaces.

 

But, were here to help solve common lighting maintenance headaches. Below are five of the snags that contribute to lighting maintenance challenges.

 

1. Choose right product



One fairly obvious reason your lights could frequently go out: short-life lighting products. If you were trying to avoid a heavy upfront investment and opted for lower-priced lighting with shorter life ratings, youre probably starting to experience frequent outages.

 

Furthermore, when products are misused paired with a bad ballast or used improperly in the application it can result in reduced lifespans.

 

AntLux led shop lights made from high quality materials, use constant current driver with high precision and high efficiency. No disturbing flickering, no inadequate lighting, stable performance.

 

2. Don't miss or wrong materials onsite

All too often, the lighting technician does not have the appropriate materials to replace every outage. This may happen for a variety of reasons:

 

1. A technician does not know the part number of what needs to be replaced prior to their visit.

2. A store may have ordered the wrong part number.

3. A store may have changed lamp types but forgot to remove the old inventory.

 

Problems may appear to be one thing and turn out to be another. In the case of an outage of a lamp which requires a ballast, the culprit could be a faulty ballast and not the lamp.

 

These issues create a ripple effect which postpones maintenance and may result in an increase of outages.

 

3. Electrical issues

Sometimes, even when the correct products are used and long-life products are in place, outages can still occur frequently. That could be due to larger electrical issues plaguing the overall electric system.

 

Its not all that uncommon to see large-scale systemic problems that interfere with lighting performance.

 

4. Bad scheduling



Just as ordering details can be lost in translation, particularities in scheduling go unstated from time to time.

 

This can lead to maintenance crews showing up at inconvenient times periods when work cannot be performed. And this goes without saying, but when previously scheduled maintenance gets postponed, the lighting gets neglected.

 

5. Bad luck

Lastly, you may have simply dealt a bad hand of cards. Murphys Law – “what can go wrong, will go wrong” – kicks in and lighting maintenance crews get stuck in unexpectedly bad traffic, product arrives broken or faulty, the technician finishes his work and the very next day another handful of lights go out, or some other crisis occurs and outages crop up.

 

The above are just a few of the issues that make it pretty easy to understand why lighting maintenance so often goes wrong.

 

But weve been in this business long enough to know the importance of keeping light levels high and outages at bay, so were committed to winning the uphill battle. We are continually evaluating our processes and labor providers so we can best avoid run-ins with instances of the above.

 

Proactively solving for lighting maintenance issues

Any car owner would tell you that maintenance tends to be most expensive and inconvenient when its reactive. Further, most would probably tell you that things fail brakes wear out, tires puncture, alternators die, etc. at the worst possible time.

 

The same goes for a reactive approach to lighting maintenance.

 

Proactive, or preventative, maintenance, on the other hand, allows for spaces to stay well-lit and sharp-looking. Here are three best practices that we recommend for implementing a successful preventative maintenance program:

 

1. Keep product stocked



The best way to improve the chances of one-call resolution on a maintenance request the holy grail of lighting maintenance is to stock common products at each location.

 

A good lighting maintenance provider should recommend commonly used products that will set their technicians up for success. While this wont result in 100 percent of maintenance calls being resolved in a single visit, our clients that implement this proactive step are almost always pleased.

 

This is also a step that you can take regardless of whether your lighting maintenance program is on-call or scheduled.

 

2. Attention to detail

Lighting maintenance involves managing an enormous number of variables from schedules, to regional differences, to product specification, to electrical system troubleshooting.

 

Great lighting maintenance providers ensure their technicians are well-trained in what to look for while on-call and know how to diagnose electrical system problems.

 

They also have an on-boarding process with clients and with their labor providers to ensure that many of these variables are discovered or discussed ahead of time.

 

3. Consider a re-lamp or retrofit

This may seem like a cop-out answer, but the reality is that the right product in the right application will most likely result in less maintenance. If you can move to more efficient, easier to maintain products, you will reap the benefits in reduced maintenance costs, reduced energy costs, and more consistent visuals across your organization.

 

AntLuxs led shop light is perfect for any application where high quality LED lighting is required for your workplace. Our led commercial light fixtures provide you more brighter, cheaper and healthier lighting than incandescent and fluorescent tubes. A step up from led light fixture is not only in light but in look. It is the perfect energy-saving replacement for both remodel and new construction applications in residential and commercial needs.

 

Maintaining your lighting doesn't have to be as frustrating as hanging strands of Christmas lights. That's what we're here for to keep your lights on and the headaches away.

 

Get more efficient, easier to maintain products

<< How to choose led high bay light

>> HOW TO CREATE THE GARAGE WORKSHOP OF YOUR DREAMS