USD

How long do LED lights really last?
2020-08-06

Invented by Nick Holonyak in 1962, LEDs are one of the most exciting lighting technologies to emerge in the last century. Promising a safe, low-cost and ultra-efficient alternative to traditional bulbs, LED lights are now experiencing their fastest ever growth in market share. One primary feature of the LED is its long life expectancy: it’s often tipped as having a potential lifespan of up to 10 years per light. Problem is: real-world tests have shown almost 30% of the lights (66 of 230 lights) actually failed long before this.


So, why are some LED lights struggling to reach their maximum potential age?


Before we pin the blame on ineffective technology or the international light conspiracy, let's review the facts to better understand the true life expectancy of LED lights.


How is LED life expectancy measured?

One of the key issues in determining how long LED lights last is how they are measured.


The lifespan of traditional incandescent lights is calculated quite simply. Its referred to as Average Rated Life (ARL), which is the length of time it would take for 50% of the sampled bulbs to fail completely (an average of 1,000 hours for traditional bulbs).


The lifespan of the modern LED, on the other hand, is measured differently.


Thats because LED lights rarely fail completely as traditional lights do. Generally speaking, their luminosity will fade gradually over time.

AntLux 4FT LED Wraparound Light Fixture 50W Ultra Slim

So LED lifespan needs to be calculated in a less binary way, leading manufacturers to define it as the point at which luminosity has reached 70% of initial output. This measurement is usually expressed as B50-L70, which is shorthand for the time that 50% of LED lights in ideal conditions will have 70% of their rated output.


However, unlike traditional lights that end up at a single maximum figure of 1000 hours, the B50-L70 of LEDs ends up as anywhere between 10,000-50,000 hours.


Every LED will have an L70 rating, which is usually calculated in hours. For example, an LED bollard with L70 of 50,000 will - in 50% of all cases - have a rated lifespan of 50,000 hours, at which point they will emit 70% of their original output. If an LED has L50 of 50,000 hours, its output decays faster than one with L70 of 50,000 hours, and so on.


So, what causes such a large discrepancy in LED life expectancy? To answer this point, we first need to look at what causes LED lights to fail.


Factors impacting the life expectancy of LED lights

When an incandescent light fails, it's immediately visible why: the filament, quite simply, breaks and the light turns off.


LEDs, on the other hand, emit energy as light of varying intensity and color when a current pushes electrons through various materials. So, rather than having binary on-off failures, LED lights decay gradually as defects in these materials occur.


Lets hone in on these potential failure points in more detail.


Material Defects

Within an LED there is an active region, where a process called radiative recombination occurs and light is produced. If the material used in this active region has an existing defect, it will be worsened by heat and electric current. Eventually, this leads to a decay in the output of the LED.


This issue is avoidable if the manufacturer chooses an LED which will exceed the expected lifespan of other components used within the light itself.

AntLux 4 Foot Integrated LED Wraparound Ceiling Lighting Fixtures for Kitchen Laundry

In order to maximize the length of time that the LED lights you buy last, check the LED component choice on the lights datasheet to be sure that its of a high enough quality.


Electrical Over Stress

"Electrical Over Stress" (EOS) is caused when an LED receives more power than its recommended maximum. This can be caused by human error, faulty power supplies, bad PCB layout or faulty components within the LED light assembly.


One cause of EOS is a static discharge making contact with the LED during the manufacturing, shipping or handling of the component. Many manufacturers will protect against this type of EOS by including a static suppressor, which will absorb radio frequencies that would otherwise damage the LED. EOS can also be caused by a power supply spiking and rippling. This can occur through poor design or an inappropriate driver which cannot regulate it's output consistently, leading to a surge in voltage when the LED is turned on. It can also happen during the testing process when LEDs are connected and disconnected rapidly.


EOS can be largely prevented by using protection circuits within the thermal and electrical parts of an LED system. Protection circuits work by regulating the maximum voltage that an LED receives, a bit like a traditional fuse. A protection circuit will kick in once a specific limit is exceeded, and will then reset after the fault clears.


Most well-designed LED systems from major manufacturers include these, with creative solutions like 'soft-start'.


You may have noticed, for example, that some LEDs lights take a few moments to turn on. This is designed to reduce the activation spike and increase the lifespan of the LED.


Heat Stress

LEDs run much cooler than its competitors but still produce a small amount of heat within their diode. In fact, excessive heat has been found to reduce the lifespan of a LED, making it important to be aware of how LED lights are affected by hot temperatures.


In short, semiconductors and capacitors are both prone to failure under heat stress making it really important to consider the LEDs operating temperature range when shopping for LED lights.

AntLux 110W 8FT LED Wraparound Ultra Slim Strip Lights

The best performing lights are designed to reduce heat stress to protect these heat-sensitive components and increase the lifespan of the bulb. First, non-LED components are mounted separately to the heat-sensitive LEDs. Second, capacitors are designed to operate at higher temperatures.


As electricians, there are two practical tips you can apply to increase the lifespan of LEDs.


If you are installing LEDs, choose appropriately sized luminaires and ensure LED lights are ventilated to allow heat to escape.

When purchasing an LED, look at the LED enclosure and heatsink. A well-designed LED light should have an effective heatsink with gaps between the fins to allow heat to dissipate into the air.


So, how long do LED lights really last?

Unfortunately, there is no simple answer to this question.


The lifespan of LED lights depends on several key factors, but generally speaking the range is anywhere between 10,000-50,000 hours.


Thats a big range, but it means that your LED lights could last up to 10 years, depending on how extensively its used and the conditions its used in.


While we cant definitively say how long a light will last for, LED lights are still much longer-lasting than their traditional counterparts, as seen in the table below.


To maximize the lifespan of the LED lights you install, be sure to watch for:


Components: Choose LED lights with good component choices and install with appropriate power supplies. If your LED lights are short-lived, check your light fitting for variations in voltages.

Environment: Install LED lights in appropriate environments with good ventilation to allow cooling. Try to avoid installing near sources of heat.

LED lights are fairly complex little pieces of technology, so it makes sense to invest in the highest quality products from LED manufacturers with a proven record. Do this, and youll be sure to install a lighting solution that will stand the test of time.


AntLux’s led wraparound light is perfect for any application where high quality LED lighting is required for your workplace. Our linear LED strip lights provide you brighter, cheaper and healthier lighting than traditional lights. A step up from the led garage light fixture is not only in light but in look. It is the perfect energy-saving replacement for both remodel and new construction applications in residential and commercial needs.

<< Best LED Garage Shop Lighting Tutorial

>> How LED light fixtures are affected by Cold and Hot Temperatures